Option 42 - Codes (Quick Menu Option 8) - Honeywell Galaxy Dimension Series Installer Manual

Galaxy Dimension Installer Manual
Option 42 – Codes (Quick Menu Option 8)
The Codes option is used to assign, modify and delete the codes that allow users to operate and access the
system. The Codes option is divided into two sub-menus:
1. User Codes - sub-divided into up to 11 menus (depending on panel used and whether the group and
MAX mode options are enabled in Menu 63) that determine all of the access information for users who are
requiring PINs. This option also assigns MAX details to user numbers;
2. PIN Warning - determines the warning period given to users prior to the programmed PIN Change
date (refer to option 51.42 = PARAMETER.PIN Change);
3. Card Users - determines the tags/cards on the system for various users.
Programming Codes
1 = User Codes
2 = PIN Warning
3 = Card Users
1 = Modify Pin
2 = Modify Level
3 = Modify Name
4 = Schedule
5 = Temp Code
6 = Modify Groups
7 = Card Number
8 = MAX Function
9 = MAX Keypad
10 = APB Forgive
11 = Template
1 = Add Batch
2 = Test Batch
3 = Delete Batch
4 = Batch Start
5 = Batch End
6 = Batch DCM Rdr
7 = Template User
Figure 6-4. Programming Codes
6-27
42 - Codes
4, 5 or 6 digit pin
1.0 to 3.6
6 alpha-numeric characters
(00=None)
00-99 days
GD-48: 1-4
GD-96: 1-16
GD-264: 1-32
GD-520: 1-32
10 digit number on access control card or fob
number of required menu option
address of keypad that MAX function displays on
This function clears passback restrictions
1 - 28 days