Table of Contents
Advertisement
9
Installing the Blower
Assembly
Parts needed for this procedure:
1
Blower assembly (from the Blower and Drive Kit)
1
Spring (from the Blower and Drive Kit)
Procedure
WARNING
An uncovered discharge opening could allow
the lawn mower to throw objects at you or
bystanders, resulting in serious injury. Also,
contact with the blade could occur.
• Never operate the lawn mower unless you
install a cover plate, a mulch plate, or a
grass chute and catcher.
• Make sure that the grass deflector is
installed when you remove the grass chute
and catcher.
1.
Remove the side-discharge chute from the
mower deck
(Figure
Note:
Save all the hardware and the
side-discharge chute. Install the side-discharge
chute when the bagger and blower are removed.
15).
1. Bolt
2. Spacer
3. Locknut
4. Spring
16
Figure 15
5. Spring installed
6. Grass deflector
7. L-end of spring (Place
it behind the deck edge
before installing the bolt)
8. J-hook end of the spring
g002519
Advertisement
Table of Contents
