5
Installing the Muffler
Deflector
Parts needed for this procedure:
1
Muffler deflector
2
Flange nut (3/8 inch)
2
Carriage bolt (3/8 x 1-1/4 inches)
Procedure
Install the muffler deflector to the side of the bagger
frame
(Figure
13).
Note:
Ensure the muffler deflector is positioned over
the tail pipe of the muffler.
Figure 13
1. Muffler deflector
2. Flange nut (3/8 inch)
6
Routing the Blower Belt
into the Blower Assembly
Parts needed for this procedure:
1
Blower belt (from Blower and Drive Kit)
Procedure
1.
For 60- and 72-inch machine decks, install the
belt around the blower pulley
g009417
3. Carriage bolt (3/8 x 1-1/4
inches)
(Figure
14).
Blower for 60- and 72-inch machines
1. Idler pulley
2. Machine deck pulley
3. Spring
2.
For 48- and 52-inch machines, loosen the
belt-guide bolt
3.
Install the belt around the blower pulley and
fixed-idler pulley
4.
Tighten the belt-guide bolt.
1. Idler pulley
2. Machine deck pulley
3. Spring
4. Spring peg
12
Figure 14
4. Spring peg
5. Belt
6. Blower pulley
(Figure
15).
(Figure
15).
Figure 15
5. Belt
6. Belt-guide bolt
7. Fixed-idler pulley
8. Blower pulley
g003398
g003454