Toro E-Z Vac DFS 78556 Operator's Manual page 9

Procedure
12
13
14
15
Note:
Determine the left and right sides of the machine from the normal operating position.
Description
Caster weight (if needed)
Clevis pin
Hairpin cotter
Lock washer (3/8 inch)
Weight-mount bracket
Bolt (3/8 x 1 inch)
Flat washer (3/8 inch)
Flange nut (small flange–3/8 inch)
Carriage bolt (5/16 x 3/4 inch)
Flange nut (5/16 inch)
Front weight (48-inch, 52-inch, and
60-inch decks)
Front weight [72-inch decks (serial
number 406294344 and below)]
Front weight [72-inch decks (serial
number 406294345 and above)]
Tap bolt (3/8 x 1-3/4 inches)
Nut (3/8 inch)
Bumper
Spacer
Locknut (5/16 inch)
No parts required
No parts required
Qty.
2
2
2
6
1
6
6
3
2
Install the weights.
2
3
1
2
2
2
2
Install the bumpers (for machines with
2
MyRide™ suspension system).
2
–
Adjust the parking brake.
–
Check the tire pressure.
9
Use