Installing The Handle Assembly And Bracket For 48- And 52-Inch Mowers; Installing The Bagger Assembly - Toro E-Z Vac DFS 78556 Operator's Manual

3. Install the handle and bracket assembly to the
side of the machine with 3 carriage bolts (3/8 x
1-1/4 inches) and 3 flange nuts (large flange–3/8
inch) as shown in
Note:
Ensure that the bolts go through the
left bumper and the lower bagger bracket and
connect them to the side of the machine.
Figure 8
1. Handle and bracket
assembly
2. Flange nut (large
flange–3/8 inch)
Figure 8.
3. Bolt (3/8 x 1-1/4 inches)
5
Installing the Handle
Assembly and Bracket for
48- and 52-inch Mowers
Parts needed for this procedure:
1 Hood assembly
1 Knob
1
Carriage bolt
Procedure
Pivot the handle out into the handle bracket and
secure it with a carriage bolt and knob
g009217
1. Knob
2. Handle bracket
12
(Figure
Figure 9
3. Carriage bolt
9).
g009418