Figure 9
1. Hood assembly
2. Bag
3. Bag tab
4. Lower the bagger hood over the bags
Figure 10
1. Hood
2. Bag
5. Position the bagger latch under the latch hook
11).
6. Push down on the bagger latch until it locks into place
(Figure
11).
4. Notch
5. Bagger frame
(Figure
10).
3. Bagger latch
4. Latch hook
(Figure
1. Bagger latch
5
Routing the Bagger Belt into
the Blower Assembly
Parts needed for this procedure:
1
Bagger belt (from the Blower and Drive Kit)
Procedure
1. Install the belt around the blower pulley
2. Install the spring to the idler arm and the peg on the
blower assembly
1. Idler pulley
2. Mower-deck pulley
3. Spring
9
Figure 11
2. Latch hook
(Figure
(Figure
12).
Figure 12
4. Peg
5. Belt
6. Blower pulley
12).