Toro E-Z Vac DFS 78556 Operator's Manual page 15

8
Routing the Blower Belt
into the Blower Assembly
Parts needed for this procedure:
1 Blower belt (from the Blower and Drive Kit)
Procedure
1. For 60- and 72-inch mowers, install the belt
around the blower pulley
Figure 13
Blower for 60- and 72-inch Mowers
1. Idler pulley
2. Mower-deck pulley
3. Spring
2. For 48- and 52-inch mowers, loosen the belt
guide (Figure 14).
3. Install the belt around the blower pulley and
fixed-idler pulley
4. Tighten the belt guide.
(Figure 13).
4. Peg
5. Belt
6. Blower pulley
(Figure 14).
Blower for 48- and 52-inch mowers
1. Spring-loaded idler pulley
2. Mower-deck pulley
3. Spring
4. Peg
g003398
15
Figure 14
5. Belt guide
6. Fixed-idler pulley
7. Blower pulley
8. Belt
g010508