Adjusting The Parking Brake - Toro E-Z Vac DFS 78556 Operator's Manual

13
Installing the Bumpers
Machines with MyRide™
Suspension System
Parts needed for this procedure:
2 Bumper
2 Spacer
2 Locknut (5/16 inch)
Procedure
For 48-inch, 52-inch, 60-inch, and 72-inch decks
(serial number 406294345 and above), install the
bumpers to the 2 outside holes of the toeboard
35).
Figure 35
1. Locknut (5/16 inch)
2. Spacer
(Figure
g030506
3. Bumper
For 72-inch decks (serial number 406294344 and
below), install the bumpers to the 2 inside holes of
the toeboard (Figure
1. Locknut (5/16 inch)
2. Spacer
14
Adjusting the Parking
Brake
No Parts Required
Procedure
Make sure that the brake is adjusted properly; refer to
the Operator's Manual for the machine.
25
36).
Figure 36
3. Bumper
g030507