Installing The Bumpers - Toro E-Z Vac DFS 78556 Operator's Manual

Figure 32
1. Carriage bolt (5/16 x 3/4
inch)
2. Weight-mount bracket
5. Install the front weights on top of the foot rest
(Figure 33).
g009226
3. Flange nut (5/16 inch)
6. Secure the front weights on top of the foot rest
and to the weight-mount bracket with 6 bolts
(3/8 x 1 inch), 6 lock washers (3/8 inch), 3 flange
nuts (small flange) (3/8 inch) and 6 flat washers
(3/8 inch) (Figure
1. Front weight
2. Flat washer (3/8 inch)
3. Lock washer (3/8 inch)
1. Weight-mount bracket
2. Flat washer (3/8 inch)
24
33).
Figure 33
4. Bolt (3/8 x 1 inch)
5. Hole in footrest
6. Flange nut (small
flange–3/8 inch)
Figure 34
3. Lock washer (3/8 inch)
4. Bolt (3/8 x 1 inch)
g009227
g009225