Toro E-Z Vac DFS 78556 Operator's Manual page 21

Figure 26
60- and 72-inch bagger shown
1. Blower assembly
2. Lower tube
g003423
3. Latch
9. Using the 3 holes or indentations in the upper
tube as a template, drill 3 holes (7/32 inch
diameter) where the upper and lower tubes join
together (Figure
1. Bagger hood
2. Upper tube
3. Drill 7/32 inch diameter
holes here (use the upper
tube as a template)
10. Remove the lower tube from the blower.
21
27).
Figure 27
4. Lower tube
5. Blower assembly
g003390