Copy Procedure - Xerox WORKCENTRE 4150 User Manual

3 Copy

Copy Procedure

1 Load the Documents
18
This section describes the basic procedure for making copies. Follow the
steps below.
Load the Documents – page 18
Select the Features – page 19
Enter the Quantity – page 21
Start the Copy Job – page 21
Job Status Screen – page 21
Stop the Copy Job - page 23
NOTE:
If the Authentication feature is enabled, you may need an account
number before using the machine. To get an account number, or for more
information, contact the Key Operator or the System Administrator.
You can load the documents to be copied either on the Document Glass or
through the Document Feeder.
For information on setting up the paper trays, refer to Setting up Paper Trays
in the Setups chapter on page 123.
Document Feeder:
The following steps explain how to load documents using the document
feeder:
1.
Before loading the documents into the document feeder, ensure they are
in good condition and remove all staples and paper clips.
2.
Insert the documents neatly into
the document feeder, face up. The
first page should be on top with
the headings towards the left of
the machine.
Xerox WorkCentre 4150 User Guide