Customer Replaceable Units - Xerox WORKCENTRE 4150 User Manual

10 Maintenance

Customer Replaceable Units

There are 3 replaceable Customer Replaceable Units (CRUs) on the machine:
• Toner Cartridge
TM
• SMart Kit Drum Cartridge
• Staples
The machine will display a message on the touch screen when any of the
above need to be reordered. This message is a warning that the unit is nearing
the end of its life. Only replace the unit when a message actually instructs you
to do so.
To replace a CRU, follow the instructions on the User Interface or refer to the
relevant sections below.
CAUTION:
When replacing consumables, DO NOT remove the covers or
guards that are fastened with screws. You cannot maintain or service
any of the parts that are behind these covers and guards. DO NOT
attempt any maintenance procedure unless specifically described in the
documentation supplied with your machine.
Toner Cartridge
This procedure shows you how to remove a used toner cartridge and replace
it with a new toner cartridge.
New toner cartridges have a capacity of approximately 20,000 images with an
average area coverage of 5%. The machine will indicate the percentage of
toner used and the number of days remaining. When the notification message
is enabled, the machine will tell you when you will need to order a new
cartridge and when to fit it. For information on setting the notification
message, please refer to Toner Cartridge Reorder Notification in the Setups
chapter on page 130.
If the feature is enabled, a message will appear on the display screen advising
you to replace the toner cartridge. If you want to replace the toner cartridge
now, open the front door. The instructions on the screen will tell you how to fit
a new cartridge.
If you do not want to replace the toner cartridge now you can select the Abort
button. The machine will continue to operate but will NOT make copies or
prints.
Xerox WorkCentre 4150 User Guide 155