Localization - Xerox WORKCENTRE 4150 User Manual

Localization

Set Date and Time
Greenwich Mean Time Offset
Xerox WorkCentre 4150 User Guide
Before using your new machine, the localization settings below will have been
set using the machine installation wizard. As your requirements change, you
may need to reset or adjust these settings.
Some features and functions on the machine require the local date and time
such as the header on a fax and the configuration sheet. This utility enables
you to set and change the local date and time on the machine.
Go To Tools > System Settings > Time and Date
Set the date in either mm/dd/yy or dd/mm/yy or yy/mm/dd format, and enter
the correct date.
Set the correct time using either the 12 or 24 hour clock. Enter the time in the
Hour and Minutes fields and choose AM and PM as relevant, if it's a 12 hour
clock.
Select the required offset using the increase and decrease buttons to the left
and select Save when complete. Information for the GMT offset setting can
be found in the Quick Install booklet.
9 Setups
113