Xerox WORKCENTRE 4150 User Manual page 42

3 Copy
20
1.
Press the All Services button on the touch screen.
2.
Select Copy on the touch screen. Ensure that the Copy screen is
displayed.
NOTE:
If the Authentication feature is enabled, you may need an account
number before using the machine. To get an account number, or for more
information, contact the Key Operator or the System Administrator.
3.
Press the Clear All button once on the control panel to cancel any
previous selections. The control panel returns to the default entry
screen.
4.
Select the button for the feature required.
Feature
Basic Copying
Image Adjustment
Output Format
If necessary, press one of the tabs and configure the copy settings. For
information on the individual tabs, refer to the following:
Basic Copying - page 24
Image Adjustment - page 27
Output Format- page 31
Description
Use this tab to select the standard options for a copy
job, e.g. reduce/enlarge, 2 sided copying, etc.
Use this tab to adjust the appearance of the copy output,
e.g. image quality, edge erase, etc.
Use this tab to produce different options for the finished
output, e.g. booklet creation, covers, etc.
Xerox WorkCentre 4150 User Guide