Error And Fault Codes - Xerox WORKCENTRE 4150 User Manual

Error and Fault Codes

Errors & Faults
Paper Door Open
Feeder
Tray Paper Low
Paper Empty at Tray
Paper Empty at Bypass
Tray
Tray Cassette Out
Tray Door Open
Tray Elevating Error
Jam from Tray
Duplex Jam
Out Bin Full
Xerox WorkCentre 4150 User Guide
If an abnormal condition arises in the machine or an incorrect operation is
performed, a message indicating the nature of the error is displayed on the
User Interface screen.
Follow the on-screen prompts to correct the error.
If the fault persists, Power Off / Power On.
If the problem persists, call for service.
Description
The side cover or front covers
are not securely latched.
Paper supply in tray has run
low (fewer than 50 sheets).
The copy paper in the paper
tray has run out.
The copy paper in the bypass
tray has run out.
Paper tray is not securely
closed.
The side cover of tray is not
securely latched.
Tray elevating top sensor
does not function correctly.
Copy paper has jammed in
the paper tray.
Copy paper has jammed in
the side cover.
Output tray is more than 90%
full.
12 Troubleshooting
Solution
Close the cover until it locks into
place. If fault persists, call service.
Load paper in the tray indicated by
the warning message.
Load paper in the tray indicated by
the warning message.
Load paper in the bypass tray.
Close the paper tray until it locks
into place.
Close the door of the tray until it
locks into place.
Open and close the paper tray. If
the problem persists, call for
service.
Open the indicated tray and
remove the jammed paper.
Open side cover and remove jam.
Open the side cover and remove
the jammed paper.
Open the side door and remove
the jammed paper.
Remove printed material from
page output area.
173