Network Scanning - Xerox WORKCENTRE 4150 User Manual

5 Network Scan

Network Scanning

Template Destinations
A default template
can also be created
using FreeFlow™
SMARTsend™ Software.
The word 'default' will be
displayed in lower case.
Destination Details
62
There are two important areas of information under the Network Scanning tab:
Template Destinations and Destination Details.
For more information on templates, refer to Template Overview on page 63
and Repositories on page 63.
The Template Destinations list displays the templates stored on the machine.
On installation, the factory default template 'DEFAULT', in upper case,
displays in the Template Destination list. The default template appears at the
top of the list and is selected automatically. All other templates follow in alpha-
numeric order. There is a maximum of 250 templates.
Templates are created using CentreWare Internet Services or FreeFlow™
SMARTsend™ (if installed).
• Template names starting with the @ symbol have been created using the
CentreWare Internet Services.
• Templates without the @ symbol have been created using software such
as FreeFlow™ SMARTsend™ and stored in a remote location.
Scrolling through the Template List
Use the up/down scroll buttons located to the right of the Template List to
move through the list one page at a time and select a Template.
To get quickly to a specific page in the Template list, use the number keypad
to identify the page number then select the pound (#) key. The counter will
display the page location.
The Destination Details section on the right side of the screen displays
information about the selected template. Each time you select another
Xerox WorkCentre 4150 User Guide