Safety Standards - Xerox WORKCENTRE 4150 User Manual

Xerox WorkCentre 4150 User Guide
• This equipment is to be used on an appropriate branch circuit/electrical
outlet. If this machine needs to be moved to a different location, contact a
Xerox service representative or your authorised local representative or
service support organisation.
• If any of the following conditions occur, switch off the power to the machine
immediately and disconnect the power cord from the electrical outlet. Call
an authorised local service representative to correct the problem.
– The equipment emits unusual noise or odors.
– The power cord is damaged or frayed.
– A wall panel circuit breaker, fuse, or other safety device has been
tripped.
– Liquid is spilled into the copier/printer.
– The equipment is exposed to water.
– Any part of the equipment is damaged.
CAUTION:
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instruction.
Quality Standards: The product is manufactured under a registered ISO9002
Quality system.
If you need additional safety information concerning this XEROX product or
XEROX supplied materials you may call the following number:
EUROPE: +44 (0) 1707 353434
USA/CANADA: 1 800 928 6571

Safety Standards

EUROPE: This XEROX product is certified by the following Agency using the
Safety Standards listed.
Agency: TUV Rheinland
Standard: IEC60950-1, 2001
USA/CANADA: This XEROX product is certified by the following Agency
using the Safety Standards listed.
Agency: UNDERWRITERS LABORATORIES
Standard: UL60950-1, 2003 Edition. Certification is based on reciprocity
agreements, which include requirements for Canada.
1 Welcome
9