Xerox WORKCENTRE 4150 User Manual page 179

If after fitting a new
toner cartridge the front
door will not close, check
that the toner cartridge is
positioned and latched
correctly.
Replacing the SMart Kit
Xerox WorkCentre 4150 User Guide
6.
To fit the new toner cartridge, slide the top of the cartridge into the
grooves at the top of the cartridge slot.
7.
Turn the locking lever counter-
clockwise.
8.
Close the front cover.
9.
Close the right side door.
10.
Press the Confirm button on the
machine display.
If you have replaced the toner cartridge as a result of a "Replace the Toner
Cartridge" message on the machine display, the machine will assume that you
have fitted a new cartridge and reset the toner usage counters and messages.
If, however, you have fitted a new toner cartridge without being instructed to
do so by the machine display, the toner usage counters will need to be reset
manually. This is done in the Access tools mode using the Supplies
Management - Toner Cartridge Re-order Notification feature.
This procedure shows you how to remove a used SMart Kit
and replace it with a new one.
Depending on the type of SMart Kit
images are provided. The machine will tell you when you need to order a new
cartridge and when to replace the cartridge.
TM
The SMart Kit Drum Cartridge can be recycled so please follow the disposal
instructions you receive with the new items.
WARNING:
Remove the toner cartridge before attempting to remove the
TM
SMart Kit Drum Cartridge.
Drum Cartridge
TM
TM
Drum Cartridge, approximately 55,000
10 Maintenance
TM
Drum Cartridge
157