Xerox WORKCENTRE 4150 User Manual page 136

9 Setups
Set Measurements
Set Altitude
114
Go To Tools > System Settings > Time and Date > GMT Offset
The measurements that are displayed on the touch screen can be set to either
inches or mm. You can also set the decimal point (Numeric Separator) to
either a period (e.g. 12.3) or a comma (e.g. 12,3).
Go To Tools > System Settings > More > Measurements
The xerographic process used in your machine to make prints is affected by
air pressure. Air pressure is determined by the height of the machine above
sea level. The machine will automatically compensate for differences in air
pressure if you enable the feature.
Xerox WorkCentre 4150 User Guide