Change Default Settings - Xerox WORKCENTRE 4150 User Manual

Change Default Settings

Set (Power Save) Duration Times
Entry Screen Default
Job Status Default
Language Default
Xerox WorkCentre 4150 User Guide
Changing the user defaults to reflect the needs of the users will make the
machine more user-friendly, increasing effectiveness and productivity.
This utility enables the System Administrator to modify the time the machine
will spend between standby and low power modes.
The machine is designed to be energy efficient and will automatically reduce
its power consumption after periods of inactivity.
This utility can be enabled or disabled.
• To change the elapsed time for the machine to go from Standby Mode to
Low Power Mode, select the appropriate time frame, e.g. after 5 minutes
duration, after 45 minutes duration, etc.
Select the Save button to confirm the change.
Go To Tools > More > Power Saver Administration > Set Duration Time
This feature enables the machine administrator to set which screen the user
sees first.
The Entry Screen appears when the machine resets selections after a user
has completed a job, or after the Clear All button is pressed. The available
options are Features, Machine Status and Job Status. To set one of the
options, touch the appropriate button and then select Save.
Go To Tools > Screen Defaults > Entry Screen Default
Use this feature to set the default screen when the user presses the Job
Status button to the left of the UI. For a full list of available screens, refer to
Job Status Screen in the Copy chapter on page 21.
Go To Tools > Screen Defaults > Job Status Default
Use this feature to set the User Interface language.
9 Setups
127