Xerox WORKCENTRE 4150 User Manual page 167

Xerox Standard Accounting (XSA)
Foreign Device Interface
Xerox WorkCentre 4150 User Guide
Copy, Print, inbound and outbound Embedded Fax, outbound Server Fax, E-
mail and Network Scanning jobs are tracked (if these options are installed on
the device).
The machine requires the Network Accounting Kit to be installed and network
access to a Xerox approved External Accounting System.
XSA tracks the numbers of Copy, Print, Networking Scanning, E-mail, Server
Fax and Embedded Fax jobs (when these features are installed on the
machine), for each user. Usage limits can also be applied to users to restrict
the total numbers of copy, print, fax and scan jobs that a user can perform.
System Administrators can print a report which contains all XSA data.
XSA is set up via Internet Services, the machine's embedded web browser.
System Administrators create accounts and specify limits before users are
authorized to access the machine.
XSA is configured via CentreWare Internet Services and requires no
additional software.
When XSA is set up, users must enter their account details at the machine to
use the device. When they have finished their job, their XSA allocation is
reduced by the number of prints, copies or scans performed.
The XSA feature is mutually exclusive from any other accounting feature. If
XSA is enabled at the device, you cannot enable Foreign Device Interface,
Auditron or Network Accounting.
The Foreign Interface Device is a card that is fitted inside the machine to allow
a third party device such as a coin operated device or a card reader to be
attached to the machine. The coin operated device or card reader allows you
to provide pay-for-print services on your machine.
9 Setups
145