Xerox WORKCENTRE 4150 User Manual page 156

9 Setups
Authentication
Initialization
134
The availability of the buttons on the Access and Accounting screen are
affected by the settings on the Authentication Mode screen. None of the
setups can be performed until the required mode has been authenticated.
Go To Tools > Access & Accounting > Authentication Mode
1.
Select the Authentication Mode button.
From the Authentication Mode screen the desired authentication mode is
enabled. Only one option can be selected at a time. The Xerox Standard
Accounting, Foreign Interface Device and the Network Accounting buttons
only appear when the options are installed. The Auditron is always available.
2.
Select the Auditron On button
3.
Select the Save button to authenticate the Auditron and proceed with the
Auditron setup.
NOTE:
The Auditron may have already been authenticated by your System
Administrator. If required, contact your System Administrator for access
passcodes.
The Auditron needs to be initialized before users can access the Auditron
features
Go To Tools > Access and Accounting > Internal Auditron Setup >
Auditron Initialization
1.
From the Access And Accounting screen, select the Internal Auditron
Setup button.
Xerox WorkCentre 4150 User Guide