Transparency Separators - Xerox WORKCENTRE 4150 User Manual

3 Copy
32
Covers
Use this feature to automatically add covers to your copied set using stock
taken from a different tray than the copies. Covers must be the same size and
orientation as the main body of the job.
No Covers: The feature is switched off.
Front Only: Use this option to add a front cover to the copies.
Back Only: Use this option to add a back cover to the copies.
Front and Back: Use this option to add both a front and back cover to the
copies.

Transparency Separators

Use this feature to add either a blank or printed divider between each
transparency within a set. Always load transparencies in the Bypass Tray.
Transparency jobs will be delivered single-sided, and collated with no
finishing. The quantity can only be set to 1 for this feature.
No Transparency Separators: The feature is switched off.
Blank Transparency Separators: Use this option to place a blank sheet
between each transparency.
Imaged Transparency Separators: Use this option to place the same image
on the divider sheet as printed on the transparency.
Transparency Supply: This button is not enabled. Transparencies can only
be fed from the Bypass Tray.
Separator Supply: Press this button to specify the tray from which the
machine needs to use the separator stock.
Xerox WorkCentre 4150 User Guide