Dukane 5000 Series User Manual page 66

Linear Vibration Welder 5000 Series
Event Log (Run & Setup Mode)
The Event Log makes a record of every event. It records the
user, which setup is used, and any process parameters that
are changed. The Log also keeps a record of the old values
and new values. The Log can display previous events up to
24 hours old. A new log file is created every 24 hours. The
machine will save up to the last 100 days of events. Files
that are older than 100 days will be overwritten.
Save to USB – Touch the Save to USB button to copy the
most current Event Log to USB 1 or USB 2. If you would
like to copy more than one Event Log, go to Utilities>Data
Log Control>Event Log - to view options.
Figure 6-20 Run Mode - Event Log
Page 60
User's Manual
Command Status
Window - Shows
which command
is executing.
Dukane Manual Part No. 403-589-01