Dukane 5000 Series User Manual page 62

Linear Vibration Welder 5000 Series
User's Manual
Total Collapse – A combination of weld and hold distance.
Weld Force – The force that is applied across the work
piece during the weld time.
Amplitude – This peak-to-peak value is the total amount
of horizontal movement of the tooling.
For example: An amplitude of 1.3mm means the upper
tooling fixture is driven 0.65mm to the left, back to the
center, then 0.65mm to the right. The fixture goes back to
center for a total cycle amplitude of 1.3mm.
System Force – This is the force that the hydraulic system
is generating at a given moment.
Force Across Part – The force that is applied across the
work piece.
Frequency – This is the frequency at which the tool is
running.
Part Counter – This is the total number of parts processed.
Suspect Part Counter – This is the total number of suspect
cycles.
Drive Current – The amount of current output by the drive.
Reset Part Counter – This button has no sub screens and
resets the part counter to zero. Only the Process Engineer
or the Administrator can reset the counter.
Page 56
Dukane Manual Part No. 403-589-01