Dukane 5000 Series User Manual page 54

Linear Vibration Welder 5000 Series
Home Machine
Homing the machine brings the welder to a defined starting
point. To home the machine:
1. Touch and hold the Home Machine button until the door
moves to its fully open position, and the table moves
down to its starting position.
2. Release the Home Machine button.
3. The machine is now at its starting point.
Alarms
(Alarms are covered at the end of this section)
Choose a Language
Language refers to the language that appears on the panel
display screen.
Below the Alarms button are buttons for primary and
secondary language choices.
Flags provide a visual cue for whatever language has been
chosen. In the figure to the right, English, as identified by
the flag of the United States, is the language for the primary
choice. Spanish, as identified by the Mexican flag, is the
language for the secondary choice.
How to Select a Language
1. Go to the Utilities Screen.
2. Go to Secondary Language Selection pull-down menu.
3. Select a language.
Context Help
A Context Help key is located near the bottom of the
side button bar, and is contect-sensitive. Touch this key
for helpful information related to the currently displayed
inforation on the main screen.
A help window appears, when the Context Help button is
touched.
Page 48
User's Manual
P r i m a r y
Language
Button
Figure 6 -11 Choose a Language
Dukane Manual Part No. 403-589-01
Secondary
Language
Button