Stapler Faults - Xerox Color C60 User Manual

Note
If paper is torn, check inside the machine and remove it.
4. Close the Right Cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open even
slightly.

Stapler Faults

Follow the procedures provided when the output is not stapled or the staples are bent.
Contact our Customer Support Center if the problem persists after you have tried the
following solutions. Stapler faults on output may look similar to the ones shown in the
following illustration.
1. No staple
2. Bent staple
3. One side of staple rising up
4. Staple bent in reverse direction
5. Flattened staple
6. Entire staple rising up
7. Staple rising up with center pressed in
If the output is stapled as shown in the figure above, contact our Customer Support
Center.
Xerox ® Color C60/C70 Printer
User Guide
Standard/Booklet Maker Finisher
13-33