Deskset Admin Settings - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide

Deskset Admin Settings

You can use the Deskset Admin Settings to set up the system features described in
Table 3. The WebUI also provides an interface for setting up your system. See
the Administrator WebUI" on page
To display the Admin Settings menu:
1. On the Deskset, press
2. Enter the Admin password, and press
The Admin Settings screen appears as shown in Figure 25.
The default Admin password is 12345. To change this password, see
System Basic Settings" on page
1. Intercom CFNA
2. Fwd/Trans to line
3. IP Settings
4. Reset User Password
5. Software Upgrade
Use
SELECT or press 1-.
The Admin Settings menu contains the items listed in Table 3.
Table 3. Admin Settings Menu
Menu Item
1. Intercom CFNA
2. Fwd/Trans to line
3. IP Settings
4. Reset User Password
5. Software Upgrade
6. Set Time and Date
Device Configuration
(MENU) then 3.
39.
(Mailbox)
(Enabled)
(Auto)
or to scroll then press Quick
Dial
SB35031 Deskset
Figure 25. Admin Settings Screen
89
36.
(SELECT).
SB35025/SB35020 Deskset
See...
page 90
page 91
page 92
page 94
page 94
page 95
Back to Contents
"Accessing
"Changing the