Sb35031 Deskset Registration - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide

SB35031 Deskset Registration

To register the cordless headset:
1. Press
The Cordless Headset Registration menu appears.
2. Remove and replace the cordless headset from its charging base.
3. Press
for the headset.
4. When registration is complete, Cordless Headset is currently Registered appears
and the cordless headset ON/OFF light turns solid blue.
5. Press
Installation
(MENU), then 2, and then 5.
The headset must be in the charger, otherwise registration cannot proceed.
Cordless Headset Registration
Cordless Headset is currently
Not Registered
Place Cordless Headset in charger.
Press Register to begin process.
Register
. Registration in Progress... appears while the Deskset searches
Register
. The User Settings menu appears.
Exit
Registration can be terminated by pressing CANCEL on the Deskset.
If the cordless headset is registered to another Deskset, it must be
deregistered first. See "Deregistering a Cordless Headset" on page
31
Back to Contents
Quick
Dial
Exit
32.