Cordless Accessory Registration And Deregistration Time-Out - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide
The cordless headset ON/OFF light slowly flashes.
4. Press

Cordless Accessory Registration and Deregistration Time-Out

If the cordless device is registered to another Deskset, it must be deregistered
first. See
For security reasons, the registration process on both Deskset and cordless accessory
terminates after the time-out period of two minutes if registration is not successful.
If the registration process times out, the Deskset it displays Registration Failed and
returns to the Cordless Headset menu.
If cordless headset registration fails, remove the headset from the charger and try the
registration process again, beginning with Step 1,
page 30
Installation
Cordless Headset Registration
Cordless Headset is currently
Not Registered
Place Cordless Headset in charger.
Press Register to begin process.
Register
. The User Settings menu appears.
Exit
"Deregistering a Cordless Headset" on page
or page 31.
Quick
Dial
Exit
"To register the cordless headset:" on
33
Back to Contents
32.