AT&T Syn248 SB35010 Installation And Configuration Manual page 41

Syn248 Installation and Configuration Guide
4. Set the Timer for Forwarded and Transferred Outside Calls. This sets the
Maximum Call Duration for incoming calls when they are forwarded to non-system
phone numbers, such as to cell phones. When you forward these calls, two phone
lines are in use for the duration of the forwarded call — one for the incoming call and
one for the call to the forwarded line — with no Syn248 user able to end the call. The
default time is 30 minutes, adjustable from 15 to 120 minutes. Calls exceeding the
Maximum Call Duration are dropped with no warning to the callers.
5. Enable or disable Hook Flash system-wide. When enabled, Desksets have a
soft key available when an external line is active. Pressing
flash, which signals your telephone service provider to activate a feature. For
example, hook flash may switch you to another incoming call when you hear a
call-waiting tone, or enable you to create a conference call. These features may be
offered as part of your phone plan. Features that use hook flash occur at the Central
Office (CO) and are separate from any similar functions in Syn248.
6. Set the System Time/Date Options. You can set the system time to follow a
Network Time Protocol (NTP) Server (recommended) or you can set the time and date
manually.
Click Set Time by NTP Server:
a.
System Configuration
Click Default to set the time automatically from the Internet.
40
Back to Contents
Flash
simulates a hook
Flash