Accessing The Administrator Webui - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide

Accessing the Administrator WebUI

WebUI information for Deskset users is contained in the "Web Interface" chapter
of the SB35020/SB35025 Deskset User's Guide and the SB35031 Deskset User's
Guide at
To access the WebUI and log on:
1. Ensure your computer is connected to the same IP subnet as the Syn248 system. The
easiest way to ensure this is to connect your PC to the PC port on the back of a
Deskset with an Ethernet cable.
2. On the Deskset, press
Deskset Information
Model No:
Status:
IP Address:
MAC Address:
Serial No:
Boot Ver:
P Firmware Ver:
Use
done.
3. Find the IP Address on the Deskset Information screen.
4. On your computer, open an Internet browser.
5. In the browser address bar, type the Deskset IP Address and press ENTER on your
computer keyboard.
The Login page appears.
System Configuration
Only one person at a time should log on as the system administrator to
prevent unintentional overwriting of changes.
smbtelephones.att.com
(MENU) then 4. The Deskset Information screen appears.
SB35031
Synchronized*
192.168.0.10
00:11:A0:11:EA:4D
GG20013043
2.7.1
1.3.
Quick
or to scroll. Press Exit when
Dial
Exit
SB35031 Deskset
You can also use a Gateway IP address (shown in
log on to the WebUI.
36
Back to Contents
.
'HVNVHW ,QIRUP DWLRQ
0RGHO 1R 6%
6WDWXV 6\QFKURQL]HG
,3 $GGUHVV  
SB35025/SB35020 Deskset
Figure 22 on page 85) to