Basic Operations - Omron V600 Series Operation Manual

Basic Operations

4-2-4 Reading Error Data
Operation Description
mode
Error logging Selects ID
function Controller error
selection logging function
Read error data Up to 30 errors
occurring in the
RUN Mode are
stored, and new
occurrences are
displayed in the
order of
occurrence along
with head
numbers and error
codes.
Read error Subtotals of errors
statistics occurring in RUN
Mode are
displayed by type.
Clear stored Stored error data
error data is cleared.
Clear error Error statistics are
statistics cleared, and the
data (year, month,
day) for starting
collection of
statistics is
specified.
4-3 Basic Operations
4-3-1 Changing Operation Mode
Relationship between Mode
Switch and Display
Monitor Mode
Basic operation procedure
ERR
ERR 1
Display messages using
ERR 2
Display messages using
ERR 3
ERR 4 SET
DATA
Clear statistics
The following describes how to switch the ID Controller operation mode. By
pressing the Left or Right Arrow Key when MONITOR is displayed, the English
or Japanese display can be selected. The selected display will be on hold until
the Left or Right Arrow Key is pressed again.
English characters or Japanese characters can be selected.
The Monitor Unit key operations can only be used in the MONITOR Mode.
Communications to the host computer stop when the MONITOR Mode is
entered.
MONITOR
Reads error occurrence data
1
Reads error statistics
2
3
Clears stored error data
4
Clears error statistics
INC (Cancel operation)
Reset
DEC
(Cancel operation)
INC
Reset
DEC
SET
Num. key Num. key
(yr) (mo)
MONITOR
Section 4-3
Page
72
73
74
75
76
SET
Num. key
(day)
59