ID Controller Installation
5-2-2 DIN Rail Attachment
DIN rail
End plate
1, 2, 3...
Attachment hooks
1. When attaching the ID Controller to a DIN rail, first attach at A, then push in
direction B to mount the ID Controller.
2. To remove the ID Controller from the DIN rail, pull the attachment hooks for-
ward.
When Monitor Unit is mounted.
15
Spacer
Note: Take DIN rail height into consideration.
A
DIN Rail
B
PFP-100N2 (made by OMRON Co.)
Section
5-2
(Note)
100
79