Omron V600 Series Operation Manual page 8

Conformity to Standards
Technical Data
Intended Environment: Industrial
1. Type designation:
2. Host interface:
3. Number of Read/Write Heads connectable: 2 channels
4. Rated power supply voltage:
5. Acceptable power supply voltage:
6. Power consumption:
7. Dielectric strength:
8. Ambient air temperature:
9. IP degree (IEC60529):
10. Pollution degree:
11. Electromagnetic Compatibility (EMC)
a) Field Withstandability:
b) RF Common Mode:
c) Electrostatic Discharge Withstandability:
d) Fast Transient Withstandability:
e) Radiated Emission:
Model Legend
ID Controllers
114
V600-CA1A/2A-V2
CA1A-V2: RS-232C
CA2A-V2: RS-422
100 to 240 VAC, 50/60 Hz
85 to 264 VAC
35 VA max.
1,500 VAC, between live parts and protective grounding conductor
3,700 VAC, between primary and secondary circuits
Operating –10 to 55 C
Storage –25 to 65 C
IP30 (for inner-panel installation)
2 (controlled environment)
V600-CA1A/2A-V2-j
I II III IV
I – V600: Inductive Identification System
II – CA1A/2A: Two Read/Write Heads connectable
-CA1A: Serial interface (RS-232C)
-CA2A: Serial interface (RS-422)
– AC power supply model
III – V2: Version 2
IV – j:
Blank – Standard model
Suffix(es) – For marketing purposes
10 V/m
10 V
4 kV (Contact)
8 kV (Air)
2 kV (DC power)
1 kV (Signal line)
Class A, Group 1
Appendix D