Omron V600 Series Operation Manual page 59

Using Monitor Unit (V600-P01)
Operation Keys
4-1-4 Preparations for Operations in Monitor Mode
Operation
Setting
JOB
Head no.
specification
(HEAD)
Page no.
(PAGE)
ADRS,
Start
address
address
(a)
End
address
(a)
DATA (d)
JOB Specification
ADRS (Address) Settings
DATA setting
56
These are used to select functions and execute operations and also include
numerical keys.
Key Designations
Function selection
JOB ERR
TEST
Operation
WRITE WRITE
READ
1 2
Numbers
to
o F
English/Japanese Character Selection
or
Note There is a beeper in the ID Controller, which activated when a mistake is made in
the Monitor Unit key operations, or when read or write operations cannot be per-
formed (because DC is not present or other reasons).
The following information provides the relationships between various settings
before the execution of read, write, or test operations in the MONITOR Mode.
Read WRITE 1,
stepped
write
Setting Setting
required required
Setting Setting
required required
Setting Setting
required required
(see note
2)
--- ---
--- Setting
required
The job specification includes the specifications of the R/W Head numbers and
page numbers required for all read or write operations.
This requires setting the start address (a) and the end address (a). It is extremely
important to ensure that the start address does not exceed the end address. If it
does, only the start address will be effective.
For a write operation, one byte of the specified data is written to the DC in the
area defined by the start and end addresses.
ADRS DATA
DEC INC SET
PESET
WRITE 2, Test read
continu-
ous write
Setting Setting Setting
required required required
Setting While While
required significant, significant,
setting can setting can
be omitted be omitted
(see note (see note
1) 1)
Setting While While
required significant, significant,
(see note setting can setting can
2) be omitted be omitted
(see note (see note
1) 1)
Setting While While
required significant, significant,
(see note setting can setting can
2) be omitted be omitted
(see note (see note
1) 1)
Setting --- ---
required
Section
Test, auto Test write
read
Setting Setting
required required
Setting Setting
required required
Setting Setting
required required
(see note (see note
2) 2)
Setting Setting
required required
(see note (see note
2) 2)
Setting Setting
required required
4-1
Test auto
write