Omron V600 Series Operation Manual page 79

Reading Error Information (ERR)
4-6-4 Clear Error Statistics
Operation Procedure
1, 2, 3...
76
This procedure is used to clear error statistics from memory, and to specify the
new date (year, month, day) to start collecting statistics.
Here we take August 10, 1988, as an example.
ERROR1 4
ERR
RESET
CLEAR S?
4
XX XX XX
SET
DATA
88 _
8 8
88 08 _
0 8
88 08 10
1 0
SET
1. When the ERR Key is pressed, the error menu is shown on the display.
2. Press the 4 Key.
Note To cancel the error data clear command, press the SET Key before
pressing the RESET Key.
3. When the SET Key is pressed, error statistics data is cleared, and the format
for specifying the new data (year, month, day) when statistics collection is to
begin is shown on the display.
Note If this data does not need to be changed, press the RESET Key.
4. When the DATA Key is pressed, the cursor appears at the left end of the dis-
play, and the date can now be specified.
5. Use numerical keys 0 to 9 to specify the date. Keys A to F are effective, but if
these are used, the setting value cannot be guaranteed.
6. When the SET Key is pressed, the date is set, and address/date display is
restored.
(1)
(2)
(3)
(4)
(5)
a00d00
(6)
Section 4-6