Omron V600 Series Operation Manual page 48

Command Types and Responses
3-4-10 Test Command (TS)
Command Format
Response Format
3-4-11 Abort Command (XZ)
Command Format
For 1 to 1 procedure
X Z
Header
46
The test message sent from the host computer is returned without change. The
test command is used for such purposes as test communications with the host
computer.
For 1 to 1 procedure
T S
Header
For 1 to N procedure
T
@ Unit No.
00 to 15
Header
For 1 to 1 procedure
T S
Header
For 1 to N procedure
@ Unit No.
00 to 15
Header
If a problem results in the response not being returning during communications
with the host computer or during local communications, the abort command can
be used to restore the ID Controller to the command waiting condition. There is
no response to the abort command.
∗
1 frame – 266 characters max.
X X X .......
1 frame – 271 characters max.
S X X X
X X X .......
T S X X X
For 1 to N procedure
@ Unit No.
00 to 15
Header
Section
∗
X
Test message
∗
X FCS
.......
Test message
∗
X
Test message
X FCS
.......
Test message
∗
X Z
FCS
3-4
∗