7
ONLINE MODULE CHANGE
(5) Resumption of control
7.3.4
(1) Conversion disable
7
7.3 Online Module Change Procedure
- 17
7.3.4 When user range setting is used and initial setting was made with GX Configurator-TI (other system
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to
redisplay the "Online module change" screen, click the
control. The FROM/TO instruction for the module resumes.
(b) The "Online module change completed" screen appears.
When user range setting is used and initial setting was made with
GX Configurator-TI (other system is unavailable)
(a) Set "Disable" in the Setting value field of Conversion Enable/Disable Setting on
the CH
Monitor/Test screen of GX Configurator-TI, and click the
Execute test button.
button to resume