When User Range Setting Is Used And Initial Setting Was Made With Sequence Program - Mitsubishi MELSEC-Q Series User Manual

7
ONLINE MODULE CHANGE
(5) Resumption of control
7.3.5 When user range setting is used and initial setting was made with
sequence program (other system is available)
(1) Conversion disable
7.3.5 When user range setting is used and initial setting was made with sequence program (other system
(a) After choosing [Diagnosis] - [Online module change] on GX Developer to
redisplay the "Online module change" screen, click the
control. The FROM/TO instruction for the module resumes.
(b) The "Online module change completed" screen appears.
(a) Set conversion enable/disable setting (Un\G0) for all channel conversion disable
and turn Operating Condition Setting Request (Y9) from OFF to ON to stop
conversion.
After confirming that conversion has stopped with the Conversion Completion
Flag (Un\G10), turn off Operating Condition Setting Request (Y9).
7.3 Online Module Change Procedure
1
button to resume
2
3
4
5
6
7
8
7
- 22