Programs Used In Normal System Configuration - Mitsubishi MELSEC-Q Series User Manual

6
PROGRAMMING
6.2

Programs Used in Normal System Configuration

Program examples given here are based on the following system configuration and using
conditions.
(1) System configuration
CH1
Thermocouple
CH2
Thermocouple
CH3
Thermocouple
(2) Switch setting conditions for the intelligent function module
(3) Program conditions
(a) The followings are used for the temperature conversion method of each channel.
(b) CH1 uses the disconnection monitor function.
(c) If a write error occurs, the corresponding error code appears in BCD.
Table 6.1 Switch setting conditions for the intelligent function module
Thermocouple type
CH1
CH2 Thermocouple K
CH3
CH4
to Not used
CH8
• CH1: Sampling processing
• CH2: Time averaging (1280ms)
• CH3: Primary delay filtering (Time constant 1280ms)
6.2 Programs Used in Normal System Configuration
QCPU
Q68TD-G-H01 (X/Y0 to X/YF)
QY10 (Y20 to Y2F)
QX10 (X10 to X1F)
Offset/gain setting
Factory default setting
---
1
2
3
4
Cold junction
temperature
compensation
YES
5
---
6
7
8
6
- 3