Averaging Processing Selection (Un\G24, Un\G25) - Mitsubishi MELSEC-Q Series User Manual

3
SPECIFICATIONS
3.4.9
(1) Select sampling processing or averaging processing (time average,
(2) The default value is set for sampling processing for all channels.
Un\G24 (Averaging processing
selection CH1 to CH4)
Un\G25 (Averaging processing
selection CH5 to CH8)
(3) To activate the setting, turning ON/OFF the operating condition setting
(4) Settable range is shown below.
[Example] When setting count average, time average, primary delay filter, and sampling
processing for channels 1, 2, 3, and 4 respectively, set the "Un\G24" to "0412
3
- 35 3.4 Buffer Memory

3.4.9 Averaging processing selection (Un\G24, Un\G25)

Averaging processing selection (Un\G24, Un\G25)
count average, moving average, and primary delay filter) for each
channel.
b15 to
CH4
CH8
request (Y9) is required.
Table 3.11 Processing method and setting value
Processing method
Sampling processing
Time average
Count average
Moving average
Primary delay filter
POINT
When setting a value out of the setting range, sampling processing is selected.
b12 b11 to b8 b7
CH3
CH7
Setting value
0
H
1
H
2
H
3
H
4
H
to b4 b3 to
CH2 CH1
CH6 CH5
".
H
b0