Chapter2 System Configuration; Applicable Systems - Mitsubishi MELSEC-Q Series User Manual

2
SYSTEM CONFIGURATION
CHAPTER2
This chapter explains the system configuration of the Q68TD-G-H01.
2.1

Applicable Systems

This section describes applicable systems.
(1) Applicable modules and base units, and No. of modules
Table 2.1 Applicable modules, number of mountable modules, and applicable base units
Applicable CPU module
CPU type
Basic model QCPU
High Performance
model QCPU
Process CPU
Programmable
Redundant CPU
controller CPU
Universal model QCPU
Safety CPU
C Controller module
SYSTEM CONFIGURATION
(a) When mounted with a CPU module
The table below shows the CPU modules and base units applicable to the
Q68TD-G-H01 and quantities for each CPU model.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
CPU model
Q00JCPU
Q00CPU
Q01CPU
Q02CPU
Q02HCPU
Q06HCPU
Q12HCPU
Q25HCPU
Q02PHCPU
Q06PHCPU
Q12PHCPU
Q25PHCPU
Q12PRHCPU
Q25PRHCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU
Q06UDHCPU
Q13UDHCPU
Q26UDHCPU
Q03UDECPU
Q04UDEHCPU
Q06UDEHCPU
Q13UDEHCPU
Q26UDEHCPU
QS001CPU
Q06CCPU-V
Q06CCPU-V-B
* 1 Limited within the range of I/O points for the CPU module.
* 2 Restrictions apply to mountable slot position. (Refer to (2) in this section)
*1
No. of modules
Main base unit
Up to 16
Up to 24
Up to 64
Up to 64
Up to 53
Up to 36
Up to 64
N/A
Up to 64
2.1 Applicable Systems
*2
Base unit
Extension base unit
:Applicable, :N/A
2
- 1
1
2
3
4
5
6
7
8