4
SETUP AND PROCEDURES BEFORE OPERATION
4.3
Part Names
The following explains the part names of the Q68TD-G-H01.
(Connector
terminal
number)
Number
1)
RUN LED
2)
ERR. LED
3)
ALM LED
4
- 3
4.3 Part Names
1)
2)
(Connector
A1
A20
Name
Displays the operating status of the Q68TD-G-H01.
On
Flashing : During offset/gain setting mode
Off
Displays the error status of the Q68TD-G-H01.
On
Flashing : Error in switch settings
Off
Displays the warning status of the Q68TD-G-H01.
On
Flashing : Checking a disconnection status
Off
3)
terminal
number)
B1
B20
Table 4.2 Part names
: Normal operation
: 5V power supply interrupted, watchdog timer error occurred, or online module
change enabled.
: Error
Switch No. 5 of the intelligent function module has been set to a value other
than zero.
: Normal operation
: Warning (process alarm, rate alarm) occurring (Refer to Section 3.4.13)
: Normal operation
Description