Siemens SINUMERIK 840D sl Function Manual page 145

Data lists
5.1 Machine data
5.1.1 NC-specific machine data
Axis monitoring
Number Identifier: $MN_
10604 WALIM_GEOAX_CHANGE_MODE
10710 PROG_SD_RESET_SAVE_TAB
Protection zones
Number Identifier: $MN_
10618 PROTAREA_GEOAX_CHANGE_MODE
18190 MM_NUM_PROTECT_AREA_NCK
5.1.2 Channelspecific machine data
Axis monitoring
Number Identifier: $MC_
20150 GCODE_RESET_VALUES[n]
21020 WORKAREA_WITH_TOOL_RADIUS
24130 TRAFO_INCLUDES_TOOL_1
24230 TRAFO_INCLUDES_TOOL_2
24330 TRAFO_INCLUDES_TOOL_3
24426 TRAFO_INCLUDES_TOOL_4
Basic logic functions: Axis monitoring, protection zones (A3)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
Description
Working area limitation during switchover of geometry
axes
Setting data to be updated
Description
Protection zone for switchover of geo axes
Number of files for machinerelated protection zones
Description
Reset G groups
Allowance for tool radius with working area limitation
Tool handling with active transformation 1.
Tool handling with active transformation 2.
Tool handling with active transformation 3.
Tool handling with active transformation 4.
5
79