Advertisement
Quick Links
NFX150-S1 Network Services Platform Quick
Start
NFX150 Network Services Platform Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mount an NFX150-S1 Device on Two Posts in a Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Connect Power to the Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Perform the Initial Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Remote Activation of NFX150 Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Warnings Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Contacting Juniper Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
test image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
NFX150 Network Services Platform Overview
See the complete NFX150 Network Services Platform documentation at
To mount and connect power to the NFX150 Network Services Platform, and perform initial configuration, you need:
Electrostatic discharge (ESD) grounding strap (not provided)
One pair of front-mounting bracket (provided)
Eight screws to secure the mounting bracket (provided)
Four screws to secure the chassis and mounting bracket to the rack (not provided)
Screwdriver appropriate for your rack mounting screws (not provided)
An AC power cord with plugs appropriate for your geographical location (provided)
RJ-45 cable and RJ-45 to DB-9 serial port adapter (provided)
Management host, such as a PC or laptop, with a serial port (not provided)
(Optional) A grounding cable (minimum 14 AWG (2 mm²), minimum 90°C wire), a grounding lug (Panduit LCC10-14BWL or
equivalent), a pair of 10-32x.25-in. screws, and a pair of flat washers (not provided). For information about installing the
grounding cable, see the NFX150 documentation at http://www.juniper.net/techpubs/
Register product serial numbers on the Juniper Networks website and update the installation base data if there is any addition
or change to the installation base or if the installation base is moved. Juniper Networks will not be held accountable for not
meeting the hardware replacement service-level agreement for products that do not have registered serial numbers or accurate
installation base data.
Register your product(s) at
Update your install base at
https://www.juniper.net/customers/csc/management/updateinstallbase.jsp
Mount an NFX150-S1 Device on Two Posts in a Rack
You can mount an NFX150-S1 device on two posts of a 19 in. rack by using the mounting brackets provided with the device or a
23 in. rack by using additional mounting brackets. The device weighs approximately 9.4 lb (4.3 kg). Two persons are required for
mounting the device.
https://tools.juniper.net/svcreg/SRegSerialNum.jsp
http://www.juniper.net/techpubs
.
.
.
Advertisement
Related Manuals for Juniper NFX150-S1
Summary of Contents for Juniper NFX150-S1
-
Page 1: Table Of Contents
Mount an NFX150-S1 Device on Two Posts in a Rack You can mount an NFX150-S1 device on two posts of a 19 in. rack by using the mounting brackets provided with the device or a 23 in. rack by using additional mounting brackets. The device weighs approximately 9.4 lb (4.3 kg). Two persons are required for... -
Page 2: Connect Power To The Device
NFX150-S1 Network Services Platform Quick Start To mount the device on a rack: Attach the ESD grounding strap to your bare wrist and to a site ESD point. NOTE: If you are mounting multiple units in the rack, mount the heaviest unit at the bottom and mount the others from bottom to top in order of decreasing weight. -
Page 3: Perform The Initial Configuration
NFX150-S1 Network Services Platform Quick Start Insert the power cord plug into the power source outlet. Insert the power cord coupler firmly into the inlet. Set the power switch to the on (|) position. Verify that the power LED is lit green and on steadily. -
Page 4: Remote Activation Of Nfx150 Devices
NFX150 devices download a boot image and initial configuration files from regional servers hosting Network Activator. The Redirect Service, which Juniper Networks hosts on a secure web server, provides authentication and authorization for NFX150 devices to access their assigned regional servers through use of ITU-T X.509 private key infrastructure (PKI) digital certificates. -
Page 5: Safety Warnings Summary
NFX150-S1 Network Services Platform Quick Start Safety Warnings Summary This is a summary of safety warnings. For a complete list of warnings, including translations, see the NFX150 documentation at http://www.juniper.net/techpubs/ WARNING: Failure to observe the following safety warnings can result in personal injury or death: Permit only trained and qualified personnel to install or replace device components. - Page 6 NFX150-S1 Network Services Platform Quick Start Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. and/or its affiliates in the United States and other countries. All other trademarks may be property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document.