Drive System Maintenance; Servicing The Tires - Toro Pro Sneak 365 Operator's Manual

Figure 26
1. Positive battery post
2. Negative battery post
2. When the battery is fully charged, unplug the charger
from the electrical outlet, then disconnect the charger
leads from the battery posts (Figure 26).
3. Replace the battery cover.
G025670
3. Red (+) charger lead
4. Black (-) charger lead
Drive System
Maintenance

Servicing the Tires

Checking the Tires and Lug Nuts
Service Interval: Before each use or daily—Check the tire
pressure.
Before each use or daily—Check the lug nuts.
•
Do not exceed the rated tire pressure. To ensure long tire
life and safe handling, check tire pressure daily, refer to
Checking the Tire Pressure (page 27).
•
Inspect tires for cuts, slashes, or bulges. Tires with defects
need to be replaced or repaired for proper handling and
safety.
•
Check daily to ensure that all lug nuts are tight. Torque
the lug nuts to 81-95 N-m (60-70 ft-lb).
3
5
Checking the Tire Pressure
Maintain the air pressure in the tires as specified. Check the
tires when they are cold to get the most accurate reading.
Tire Size Ply Rating
23 x 10.5 x 12 4
26 x 12 x 12 8
Note: Use a lower tire pressure when operating in sandy soil
conditions to provide better traction in the loose soil.
27
1
4
2
g023497
Figure 27
Pressure
kPa
138 20
207 30
psi