Maintenance; Recommended Maintenance Schedule(S) - Toro Pro Sneak 365 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position. Refer to Product Overview
(page 12).
Important: Refer to your engine Operator's Manual for
additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 25 hours
After the first 50 hours
After the first 250 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 250 hours
Every 400 hours
Every 500 hours
Maintenance Procedure
• Replace the hydraulic filter.
• Change the engine oil and filter.
• Change the hydraulic fluid.
• Grease the machine (Grease immediately after every washing).
• Check the air filter service indicator light (more frequently if conditions are dusty
or sandy).
• Check the engine oil
• Check the fuel filter/water separator.
• Check the tire pressure.
• Check the lug nuts.
• Check and refill the engine coolant.
• Check the hydraulic-fluid level.
• Remove debris from the machine and screens.
• Check for loose fasteners.
• Drain water and other contaminants from the fuel filter/water separator.
• Check the battery electrolyte level (replacement battery only).
• Check the axle oil levels.
• Check the cooling system hoses.
• Check the hydraulic lines for leaks, loose fittings, kinked lines, loose mounting
supports, wear, weather, and chemical deterioration.
• Check for dirt build-up in the chassis.
• Remove the air cleaner cover, clean out any debris, and check the air filter service
indicator light (more frequently if conditions are dusty or sandy).
• Change the engine oil and filter
• Drain and clean the fuel tank.
• Check the battery cable connections.
• Check the transmission oil.
• Clean the radiator.
• Check the fuel lines and connections for deterioration, damage, or loose connections.
• Replace the air filter (more frequently if conditions are dusty or sandy).
• Replace the fuel filter/water separator.
• Check and maintain the ROPS; check it after an accident.
Note: Download a free copy of the Electrical Schematic or
Hydraulic Schematic for your machine by visiting www.Toro.com
and searching for your machine from the Manuals link on
the home page.
20