Product Overview; Controls - Toro Pro Sneak 365 Operator's Manual

Product Overview

2
1
Right-side view
1. Vibratory plow 3. Engine-oil filter
2. Vibratory-plow 4. Air filter
control
1 2 3
4 5
Left-side view
1. Diesel-particulate filter
(DPF)
2. Regeneration-inhibit
switch
3. Fuses
3 4 5 6
g025662
Figure 5
5. Engine-oil cap
6. Fuel filter/water
separator
6
Figure 6
4. Battery
5. Coolant-expansion tank
6. Hydraulic tank

Controls

Become familiar with all of the controls before you start the
engine and operate the machine.
Throttle
The throttle controls the engine speed. Push the knob to
increase the engine speed. Pull the knob to decrease the
engine speed.
Parking Brake Lever
To set the parking brake, pull the lever up and push it forward.
To release the parking brake, pull the lever back and down.
Attachment Control Lever
The attachment control lever has 2 positions: raise and lower.
The configuration of the machine determines which direct
raises or lowers the attachment; refer to the Operator's Manual
for your attachment to configure your machine.
1. Throttle
2. Indicator lights
3. Hour meter
4. Regeneration-acknowledge
switch
5. Attachment-control lever
Traction-Control Lever
The traction control lever controls the direction and speed of
the machine during transport. To go forward, push the lever
forward. To reverse, pull the lever backward. The further you
push or pull the lever, the faster the machine will travel. To
turn, push the lever to the left or right.
12
Figure 7
6. Parking brake
7. Fuel gauge
8. Key switch
9. Traction-control lever
10. Creep-control lever