Toro Pro Sneak 365 Operator's Manual page 34

Figure 38
1. Upper left panel
3. Place a large drain pan (capable of holding 57 liters (15
US gallons) on the ground under the hydraulic tank.
4. Remove the hydraulic tank cap and use a pump to
empty the hydraulic tank.
5. Remove the lower right side cover plate and loosen the
hose clamp holding the suction hose to the hydraulic
tank (Figure 39).
Figure 39
1. Hose clamp
6. Remove the left side cover plate and loosen the 3 hose
clamps under the hydraulic tank (Figure 40).
2. Hydraulic tank
1. Hose clamp
7. Disconnect the electrical lead to the oil temperature
sending unit at the bottom of the reservoir.
8. Loosen the hydraulic tank straps and remove the
hydraulic tank from the machine (Figure 41).
9. Flush the reservoir with cleaning solvent.
10. Remove the elbow adapters and remove and clean the
filter screens with compressed air (Figure 42).
34
Figure 40
g026707
Figure 41